Do you have a question about the Nighthawk CB750SC 1984 and is the answer not in the manual?
Questions and answers
tom gelfand
February 26, 2025
how do you get 6psi into the forks
2 comments:
Mr. Anderson
May 14, 2025
To get 6 psi into the forks of a 1984 Honda Nighthawk CB750SC, use a low-pressure air pump or a hand pump with a pressure gauge. Carefully connect the pump to the air valve on top of each fork and add air slowly. Monitor the pressure to avoid exceeding 6 psi. Do not use high-pressure compressors, as they can damage the forks.
This answer is automatically generated
tom gelfand
May 30, 2025
@Mr. Anderson do you know if there is red lens for rear signals ?
Need help?
Do you have a question about the Nighthawk CB750SC 1984 and is the answer not in the manual?
Questions and answers
how do you get 6psi into the forks
To get 6 psi into the forks of a 1984 Honda Nighthawk CB750SC, use a low-pressure air pump or a hand pump with a pressure gauge. Carefully connect the pump to the air valve on top of each fork and add air slowly. Monitor the pressure to avoid exceeding 6 psi. Do not use high-pressure compressors, as they can damage the forks.
This answer is automatically generated
@Mr. Anderson do you know if there is red lens for rear signals ?