Bearing Inspection; Connecting Rods - Honda CB400T Shop Manual

HONDA
CBLCOOT
CRANKSHAFTIBALANCER
- 7
BEARING INSPECTION
CONNECTING RODS
Inspect the bearing inserts for damage, separa-
-.
tion, or other defects.
Put a piece of plastigauge on each crankpin,
avoiding the oil hole.
Install the bearing caps on the correct crank.
pins, and torque them evenly.
SPECIFIED TORQUE:
2.5-2.9 kg-m (18-21 lbs-ft)
NOTE
Do not rotate crankshaft during inspec-
tion.
2.5-2.9 kg-m (18-21 I!&&)
-.
Remove the caps and measure the compressed
plastigauge on each crankpin.
OIL CLEARANCE SERVICE LIMIT:
0.08 mm (0.003 in.)
Date of Issue: September, 1977
o
HONDA MOTOR
co.,
LTD.
10-9