Table of Contents
Advertisement
HONDA
C8400T/CM400T~A~E~C
Install the air hose connector to the left for
tube cap.
TORQUE: 0.4-0.7
kg-m (3-5 ft-lb)
Connect the air hose to the left fork con-
nector.
TORQUE: 1.5-2.0 kg-m (11-14 ft-lbl
Install the parts in the reverse order of
removal.
Fill the fork tubes with air to 0.8+0.2kg/cm2
(1 1
f
3 psi).
Use only
a
hand operated air pump
to fill the fork tubes. Do not use
compressed air.
Do not exceed the specified air prer-
sure or fork tube component damage
may occur.
With the front brake applied, pump the front
forks up and down several times. Place the
motorcycle on i t s center stand. Check the air
,:ressure and adjust if necessary.
'81 ADDENDUM
Date of Issue: December, 1980
O
HONDA MOTOR CO., LTD.
Advertisement
Table of Contents
Troubleshooting
