A.c. Generator Installation; Installation Of Parts - Honda CB400T Shop Manual

HONDA
C B 4 0 0 T
CRANKCASE
A.C. GENERATOR INSTALLATION
Install the stator and fixed pulser.
NOTE
I .
Be sure the wires are routed pro-
I
perly. Secure with the cable tlamp as
shown.
Check that the wires do not inter-
fere with the A.C. uenerator rotor.
Install the A.C. generator rotor.
TORQUE SPECIFICATION:
10.0-12.0
kg-m
(70-90 lbr-ft)
GENERATOR ROTOR
INSTALLATION OF PARTS
10.0-12.0 kg-m
(70-90 lbs-ft)
Install the following parts:
Gearshift spindle. (Section 11)
Clutch and oil pump drive chain. (Section 8)
Cylinder head, cylinders and pinons. (Sections 6 and 7 )
1, Engine. (in frame) (Section
5)
Fill crankcase with recommended oil. (pages 3 and 4)
Date o f Issue: September, 1977
0 HONDA MOTOR CO., LTD.
9- 5