Axle Inspection; Wheel Bearing Inspection; Wheel Inspection - Honda CB400T Shop Manual

WHEEL BEARING INSPECTION
~ ~
HONDA
C B 4 0 0 T
FRONT WHEEL/BRAKE/SUSPENSION
Check the wheel bearing play by placing the
wheel in a truing stand and spinning the wheel
by hand. Replace the bearings with new ones
if they are noisy or have excessive play.
AXLE INSPECTION
Set the axle in V blocks and measure the
runout. The actual runout i s 112 of TIR
(Total Indicator Reading).
WHEEL INSPECTION
SERVICE LIMIT:
0.2 mm 10.008 in.)
Check the rim runout by placing the wheel in
a
truing stand. Then spin the wheel by hand.
and read the runout using a dial indicator.
repaired and must be replaced with a
new one if the service limits are ex-
ceeded.
PLAY
I
SERVICE LIMITS:
RADIAL RUNOUT:2.0 mm (0.08 in.)
AXIAL RUNOUT: 2.0 mm (0.08 in.)
Date of Issue: September, 1977
o
HONDA MOTOR CO., LTD.
1 2 - 7