Icm Recording Monitor; Recording A Conversation; Fax Forwarding/Paging; Programming A Fax Forwarding Number - Brother FAX-202 Owner's Manual

ICM Recording Monitor

This feature lets you turn the speaker volume for voice messages ON or OFF. When
you turn the monitor OFF, you will not hear messages as they come in.
1
Press Function/Set, 8, 5.
2
Use or
3
Press Stop to exit.

Recording a Conversation

You can record a telephone conversation by pressing Play/Record during the
conversation. Your recording can be as long as the Incoming Message Maximum
Time. You and the other party will hear a beep every 15 seconds while recording. To
stop recording, press Stop. You cannot record a conversation using Speaker Phone.

Fax Forwarding/Paging

When Paging is set to ON, your fax machine dials the pager number you've
programmed, and plays the Paging OGM you have recorded when connected, to
activate your pager and let you know you have a fax or voice message in the Message
Center memory.
When Fax Forwarding is set to ON, your fax machine dials the fax machine phone
number you've programmed, and forwards any faxes you've received.
You can not use Paging and Fax Forwarding at the same time.

Programming a Fax Forwarding Number

1
Press Function/Set, 8, 6.
2
Press or
FAX FORWARD? and press Function/Set.
3
Enter the number of the fax machine where
faxes will be forwarded (up to 20 digits) and
press Function/Set.
4
Press Stop to exit.
You can change a Fax Forwarding number remotely. (See page 9-12.)
You can not use Paging and Fax Forwarding at the same time.
9 - 6
M E S S A G E C E N T E R ( F O R F A X - 3 3 3 M C O N L Y )
to select OFF (or ON) and press Function/Set.
until the LCD displays
FWD#:
ENTER & SET