Keithley 2015 Service Manual page 130

B-4 Calibration Reference
Table B-1
Remote calibration command summary (continued)
Command
:CALibration
:PROTected
:AC
:STEP1
:STEP2
:STEP3
:STEP4
:STEP5
:STEP6
:STEP7
:STEP8
:STEP9
:STEP10
:STEP11
:STEP12
:STEP13
:STEP14
:STEP15
:DIST
:STEP1
:STEP2
:FGEN
:STEP1
NOTES:
1. DC:STEP0, AC:STEP14, and AC:STEP15 are one-time factory calibration points and are valid only in man-
ufacturing calibration mode.
2. Upper-case letters indicated short form of each command. For example, instead of sending
":CALibration:PROTected:INITiate," you can send ":CAL:PROT:INIT."
Description
Calibration root command.
AC cal steps.
10mV AC at 1kHz step.
100mV AC at 1kHz step.
100mV AC at 50kHz step.
1V AC at 1kHz step.
1V AC at 50kHz step.
10V AC at 1kHz step.
10V AC at 50kHz step.
100V AC at 1kHz step.
100V AC at 50kHz step.
700V AC at 1kHz step.
100mA AC at 1kHz step.
1A AC at 1kHz step.
1
2A AC at 1kHz step .
1
1V AC at 3Hz step .
1
1V AC at 1kHz step .
Distortion cal steps.
1V RMS at 137Hz step.
1V RMS at 844Hz step.
Calibrate function generator.