Drag & Drop Bypasses Auto-Ripple; Update Waveform Color With Cursor Position; Apply Default Fade At Fade Creation; Fade Library Location - Merging Pyramix User Manual

Nudge #1~Nudge #5
For each nudge preset, enter an numeric value and click the appropriate check box to set increments to frames,
samples, milliseconds, CD frames or the current Bars & Beats grid.
Audition after Nudge
These options set automatic Audition on for the selected actions.
To
When checked, the playback will start before the selected option and stop when this is reached (cursor, mark in or
mark out)
From
When checked, the rehearse will be performed from the selected option (cursor, mark in or mark out)
Separate To and From options are provided for Gate In and Gate Out
Drag & Drop
Auto-Crossfade by default - Control key for Drag & Drop
When checked, dragging a selection or Clip over another results in a crossfade. (Cursor changes to a hand with an
X.) Otherwise, dragging a selection or Clip over another overwrites it. (Cursor is a hand) Holding down the control
key when dragging selects the alternate function.
Drag & Drop bypasses Auto-Ripple
When checked, dragging a selection on the Timeline to a new location does not cause a ripple to take place even
when in Auto-Ripple mode.
N.B. If a Clip is dragged from the Media Manager over a Timeline clip a Ripple WILL result.
Fade Editor
Redirect Timeline Play and shortcuts to Fade Editor
When checked, the Timeline Zoom commands are redirected to the Fade editor. Also, the Active Machine > Tog-
gle Play/Stop command usually mapped to the Spacebar is replaced with the Fade Editor > Audition X Fade
command but only if the Fade Editor has been opened with the Fade Editor > Open Editor command.

Update waveform color with cursor position

When checked the waveform color will change from the default to the color set in Settings > All Settings >
Application > TimeLine Layout : Waveform Position Color whenever the Playhead cursor is on the right-hand
side of the Reference Point (default is centre fade position) in the Fade Editor.

Apply default fade at fade creation

When checked the default Fade In/Out default will be applied when a new fade is created.
Undock Fade Editor when editing a fade
On by default. When checked the Fade Editor Tab is automatically undocked when editing a fade.
Enable Undo for every Fade Editor Change

Fade library location

This is the path for the fade library. The Browse button launches an Explorer window allowing any local or net-
work path to be set.
Note: If you do decide to change the default location, copy the FadeLibrary.pml file from the
default location to the new location and include it in the path.

Time Stretch Tool

The Selected: combo box offers a choice of Time Stretch algorithms depending on which keys are installed.
Settings : Application 28 - 680