Merging Pyramix User Manual page 542

SRC Filter Type
If Sample Rate Conversion is necessary this option will be available. It uses the Merging technologies HeptaCon
technology. Choose the desired Filter Type from the drop-down list :
• Linear Phase features constant group delay, thanks to the linear phase, and has a symmetric impulse
response, but also longer rings.
• Minimum Phase features an asymmetric impulse response and, eponymously, minimum phase response.
• Apodizing offers the steepest response around the Nyquist point and linear phase. It offers the best of
both worlds for the about the same computational effort as the 2 other designs.
Dithering
Note: There is no necessity to manually disable dither in the Mixer.
There is a choice between two dither processing units:
Use Mixer Settings (default)
Applies the same treatment as the Mixer's Dither (parameters are those selected in the Mixer) or
Use 16 bits WLC/Noise Shaper
Controllers
Offline Controllers
Untick the box if you want to use a Hardware Controller while generating the image in realtime for e.g. changing
Monitor volume etc. or to fade out.
Export
Album Publishing
Tick the box to produce an album for digital delivery in addition to a CD image. Please see: Album Publishing on
page 544
Settings
Opens the Album Publishing options Properties dialog.
Mixer Sources
Pick two appropriate bus outputs from the list shown by Ctrl + Clicking them.
CD/SACD Mastering and Album Production : Exporting Projects to CD Image Files
Generate CD Image - Mixer Sources
25 - 542