Masscore; Mt Asio Bridge - Merging Pyramix User Manual

MassCore

Note: The MassCore mode is indicated in brackets but is determined by the hardware present in
the PC.
VST Plugins Engine(*)
This sets the VST buffer size in samples. The smaller the buffer the lower the latency and vice-versa. Some third-
party VST plug-ins require very large buffer sizes. This setting is provided to give the user control over the required
value. Increasing the value can prevent clicks at the expense of increased latency.
Values up to 8192 samples may be set.
No of Cores:
On a Quad Core sets the number of VST cores used 1, 2 or 3 for a quad core CPU. (Default is two, one CPU core is
already dedicated to MassCore.) This option is useful when dealing with extreme Projects and for a few VST plug-
ins which do not like Multithreading processing. For a better understanding of VST and MassCore core allocation
please see: MassCore & VST Core Allocation on page 590

MT ASIO Bridge (*)

This sets the Virtual ASIO buffer size in samples.
Note: (*) The Buffer size values are based on the 1Fs (44.1k and 48k) range of sampling rates. For
higher sampling rates, actual values can be obtained by multiplying the effective Sampling
Rate's range factor (2,4 or 8) by the value displayed.
Settings : Hardware
All Settings Hardware MassCore
28 - 644