Track Automation Menu - Merging Pyramix User Manual

Track Automation Menu

Right-clicking the Show/Hide Automation button pops up the automation menu for the Track. This menu is
modal,i.e. the content varies according to the current mixer architecture and depending on pre-existing automa-
tion data.
Gain Bus 1 | Gain
Fader Gain
Mute
Panning
Sends
More
Note: All of the above choices will be overridden the next time a different control parameter is
written, if Auto Display (see below) is turned On.
Track Automation Initial context menu
This line shows the current automation parameter selected for display as a curve.
Sets the automation curve display to Fader Gain .
Sets the automation curve display to Mute .
Sets the automation curve display to the Pan or Balance parameter chosen from
the sub-menu. The options available will depend on the type of Mixer Strip and
the Buses present in the Mixer. Any of the following may be present:
Pan , Balance , Left/Right Pan {bus} Front Rear Pan {bus} .
Sets the automation curve display to the Send chosen from the sub-menu.
Sets the automation curve display to any other automatable parameter in the cur-
rent mixer which has automation data written, chosen from the sub-menu.
Automation : Display and Editing of Automation Data 15 - 373