Changing The Type For Courier/Letter Gothic; Changing The Font Size - Kyocera FS-6020 Operation Manual

Chapter 1 Using the Operator Panel
Press the or
6
font number appears. For font numbers of the inter-
List of Fonts on page 5-1
nal fonts, see
>Font Select
Internal
When the desired font is displayed, press the ENTER
7
key.
Press the MENU key. The message display returns to
8
Ready.

Changing the Type for Courier/Letter Gothic

Courier or Letter Gothic font type can be selected as Regular
or Dark. For example, to change the type of Courier, proceed
as follows:
Press the MENU key.
1
Press the or
2
pears.
Font
Press the key.
3
Check that Internal is displayed and press the
4
key.
>Font Select
Internal
Press the or
5
appears.
>>Courier
Regular
Press the ENTER key. A blinking question mark (?)
6
appears.
>>Courier
? Regular
Select Regular or Dark using the
7
Press the ENTER key.
8
Press the MENU key and the message display re-
9
turns to Ready.
1-28
key repeatedly until the desired
.
>
key repeatedly until Font > ap-
>
>
key repeatedly until >>Courier
or key.

Changing the Font Size

You can change the size of the default font. If the default font
is a fixed-pitch font such as Courier or Letter Gothic, the
character pitch can be changed instead of the font size.
Press the MENU key.
1
Press the or
2
pears.
Font
Press the key.
3
Check that Internal is displayed and press the
4
key.
>Font Select
Internal
Press the or
5
pears.
>>Size
012.00 point(s)
Press the ENTER key. A blinking cursor ( _ ) ap-
6
pears.
>>Size
012.00 point(s)
Press the or
7
ue of the figure where the cursor is blinking. The
font size can be set between 4 and 999.75 points, in
0.25-point increments. You can use the
keys to move the cursor right and left.
When the desired size is displayed, press the ENTER
8
key.
Press the MENU key. The message display returns to
9
Ready.
key repeatedly until Font > ap-
>
>
key repeatedly until >>Size ap-
key to increase or decrease the val-
and