Font Selection/Settings; Selecting The Font; Courier; Letter Gothic - Kyocera KM-3035 Operation Manual

4. Selecting the Printer Settings

4-4 Font selection/settings

About the font selection/settings
It is possible to perform font selection/settings for the 4 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
1

Selecting the font

Selects the font that will be used for printing. This setting
is made by entering the ID of the desired font. To select a
font that is already installed in the printer, enter "I###"
(with the desired font ID entered in place of ###). To verify
font IDs, print out a Font List by following the procedure in
"(18) Font List print out". It is possible to select a font other
than those already installed, such as those contained in
the optional Memory Card.
Optional font IDs such as "S###", etc., start with different
letters according to the type of the font as shown below.
S: Software font (download)
M: Memory card font
H: Hardware font
H: RAM disk font
O: Optional ROM font
2
Sets the character size and character pitch
Selects the code set that will be used under each font.
3

Courier

Allows you to select between "Regular" and "Dark (bold)".
4

Letter Gothic

Allows you to select between "Regular" and "Dark (bold)".
5
Code set
Selects the code set that will be used under each font.
6

Font List print out

Item Available settings
Size : 4.00 ~ 999.75 points
Pitch : 0.44 ~ 99.99 cpi
Regular
Dark
Regular
Dark
The code sets that are available
for selection will differ depending
upon the font.
4-12
Remarks
The font can be set separately for
each interface. To select an installed
font, select "Internal". To select a font
other than those already installed,
select "Option" and set the desired
font.
Either the character size or character
pitch is displayed according to the
font IDs.
Displayed only when the "Internal" is
selected.
Displayed only when the "Internal" is
selected.