Chapter 1 Using the Operator Panel
Menu Selection System
This section explains how to use the menu selection system. The MENU key on the operator panel allows you to use the menu to
set or change the printer environment such as the number of copies to print, emulation, etc., to your specific needs. Settings can
be made when Ready is indicated on the printer message display.
The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, which
take priority over operator panel settings.
Entering the Mode Selection Menu
Press the MENU key when Ready is indicated on the printer message display.
The mode selection menu is displayed.
Ready
PAR A4 PLAIN
Mode Selection Menu
Print
Menu Map
Print
Status Page
Paper Handling >
Selecting a Menu
The mode selection menu is hierarchical. Press the
key to display the desired menu.
•If the selected menu has a sub-menu,
the menu.
Paper Handling >
Press the
key to move to the sub-menu or
back.
•
is displayed before the sub-menu.
>
Indicates that this is the sub-menu
>Cassette Size >
Custom
Press the
key to move to another sub-menu or
go back.
1-4
Press
key.
Press
Press
>Cassette Size >
Custom
>MP Tray Size
A4
or
is displayed after
>
Indicates that there is a
sub-menu
key to go
Indicates that there is
another sub-menu
key to
key.
key.
>>Unit
mm
Sub-menu
•
is displayd before the second sub-menu.
>>
>>Unit
mm
Indicates that this is the second sub-menu
Setting a Menu
Select the desired menu and press the ENTER key to set or
change the configuration.
Press the
or
ENTER key to finalize the value or selections set.
Cancelling Menu Selection
If you press the MENU key when selecting a menu, the mes-
sage display returns to Ready.
Press
Press
key to display the desired item and the
key.
key.