Paper Type - Kyocera FS-6020 Operation Manual

Chapter 2 Paper Selection
Colored Paper
Colored paper should satisfy the same conditions as white
Paper Specifications on page 2-1
bond paper, listed in
addition, the pigments used in the paper must be able to
withstand the heat of fusing during the printing process (up
to 200 °C or 392 °F).
Preprinted Paper
Preprinted paper should have a bond paper base and meet the
specifications listed in the table on
ink must be able to withstand the heat of fusing during the
printing process, and must not be affected by silicone oil.
Do not use paper with any kind of surface treatment, such as
the type of paper commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as
the white bond paper (see
except whiteness.
NOTE
Before purchasing recycled paper, test a sample on the printer
and check that the print quality is satisfactory.
2-6
page 2-2
. The preprinted
Paper Specifications on page 2-1

Paper Type

. In
The printer is capable of printing under the optimum setting
for the type of paper being used.
Setting the paper type for the paper source from the printer's
operator panel will cause the printer to automatically select
the paper source and print in the mode best suited to that type
of paper.
A different paper type setting can be made for each paper
source including the MP tray. Not only can preset paper types
be selected, but it is also possible for you to define and select
customized paper types. See
page 1-19
.
The following types of paper can be set.
)
Paper
Source
Media
Type
Plain
Transparency Yes
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
Custom 1
*
(to 8)
Yes: Can be stored
This is a paper type defined and registered by the user. Up
*
to eight types of user settings may be defined. For details,
Customizing the Paper Type on page 1-19
see
Customizing the Paper Type on
Paper
MP Paper
Cas-
Tray Weight
sette
Yes Yes Normal
No Extra
Heavy
Yes Yes Normal
Yes No Normal
Yes Yes Normal
Yes Yes Normal
Yes No Light
(Thin)
Yes Yes Normal
Yes Yes Normal
Yes Yes Normal
Yes Yes Normal
Yes No Heavy
(Thick)
Yes No Heavy
(Thick)
Yes No Heavy
(Thick)
Yes Yes Normal
No: Cannot be stored
Duplex
Path
(MP tray
available
only in Cas-
sette mode)
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
Yes
.