Resetting The Type Adjust; Adjusting The Print Density - Kyocera FS-6020 Operation Manual

Resetting the Type Adjust

You can reset the custom settings (Custom1 to 8) that are set
Customizing the Paper Type on page 1-19
as described in
Press the MENU key.
1
Press the or
2
Handling > appears.
Paper Handling >
Press the key.
3
Press the or
4
Type Adjust appears.
>Reset Type
Adjust
Press the ENTER key. A question mark (?) appears.
5
>Reset Type
Adjust ?
Press the ENTER key. All the customized paper
6
weight and duplex path settings will be reset to the
default. The message display returns to Ready.
key repeatedly until Paper
key repeatedly until >Reset

Adjusting the Print Density

The print density can be adjusted in five steps: from 01 (light)
.
to 05 (dark). The default setting is 03.
Press the MENU key.
1
Press the
2
Handling > appears.
Paper Handling >
Press the
3
Press the
4
Adjust > appears.
>Type Adjust
Custom 1
Press the
5
Press the
6
Density appears.
>>Print Density
03
Press the ENTER key. A blinking question mark (?)
7
appears.
>>Print Density
03
?
Select the print density from five steps from 01
8
(light) to 05 (dark) using the
Press the ENTER key.
9
Press the MENU key. The message display returns to
10
Ready.
This finishes the custom paper type settings.
Chapter 1 Using the Operator Panel
or key repeatedly until Paper
key.
or key repeatedly until >Type
>
key.
or key repeatedly until >>Print
or key.
1-21