Alternative Emulation For Kpdl Emulation; Printing Kpdl Errors - Kyocera FS-6020 Operation Manual

Chapter 1 Using the Operator Panel
To set the KC-GL page size, press the
11
press the or
displayed.
To change the page size, press the ENTER key. A
12
blinking question mark (?) appears.
>KC-GL Page Set
? [SPSZ]
Press the or
page size (A2, A1, A0, B3, B2, B1, B0, and SPSZ)
appears. When selecting SPSZ, printing will be done
with the paper size specified by the PRESCRIBE
SPSZ command. For details, see
Commands Command Reference
Press the ENTER key to set the page set you just se-
13
lected.
Press the MENU key. The message display returns to
14
Ready.

Alternative Emulation for KPDL Emulation

NOTE
For printing in the KPDL emulation mode, it is recommended
that you install expansion memory of 16 MB or more (total print-
er memory 32 MB or more).
The auto KPDL (KPDL (AUTO)) emulation enables the print-
er to automatically change the emulation mode according to
the print job received. The alternative emulation can be se-
lected using the operator panel. The default alternative emu-
lation is PCL 6.
Press the MENU key.
1
Press
the or
2
appears.
Emulation
PCL 6
Press the ENTER key. A blinking question mark (?)
3
appears.
Emulation
? PCL 6
1-26
key, then
key until >KC-GL Page Set is
key repeatedly until the desired
PRESCRIBE
in the CD-ROM.
key repeatedly until Emulation
Press the or
4
display KPDL (AUTO) appears.
Emulation
? KPDL (AUTO)
Press the ENTER key.
5
Press the key. When >Print KPDL Errs is dis-
6
played, press the
through the emulation in the following order:
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
Epson LQ-850
Press the ENTER key. A blinking question mark (?)
7
appears.
>Alt. Emulation
? PCL 6
Press the or
8
alternative emulation appears.
Press the ENTER key.
9
Press the MENU key. The message display returns to
10
Ready.

Printing KPDL Errors

The printer can print error descriptions when a printing error
occurs during KPDL emulation. The default is Off - the print-
er does not print KPDL errors.
Press the MENU key.
1
Press
the or
2
appears.
Emulation
PCL 6
key repeatedly until the message
or key. The display cycles
key repeatedly until the desired
key repeatedly until Emulation