Creating A Hotspot Service - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

Figure 32. The Create New RADIUS Serve form

Creating a Hotspot Service

NOTE: If you do not want to provide a hotspot service to users, skip this step.
NOTE: Before creating a hotspot, you need to create a user defined interface. For
information on how to create a user defined interface, see the Administrator Guide
for release 2.5.
A hotspot service requires an AAA server. Before creating a hotspot service, make
sure you have already added an AAA server to the SCG. For more information, refer
to Adding an AAA
Follow these steps to create a hotspot service for an AP zone.
1 Go to Configuration > AP Zones.
2 Click the AP zone for which you want to create a hotspot service. Alternatively,
click the AP zone from the Management Domains tree.
3 Under the AP Zones menu on the sidebar, click WISPr (Hotspot).
4 Click Create New. The Create New Hotspot Service form appears.
5 Configure the hotspot service settings listed in
Table 13. Hotspot service settings
Setting
General Options
SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A
Server.
Description
Configuring the SCG for the First Time
Configuring AAA Servers and Hotspot Settings
Table 13.
63