Configuring The Hotspot Service - Ruckus Wireless ZoneFlex 2741 User Manual

Configuring the Access Point

Configuring the Hotspot Service

Configuring the Hotspot Service

The hotspot service can be deployed on standalone ZoneFlex APs through the Web
interface. At a minimum, you must configure a login redirect URL and a RADIUS server
to which users will be authenticated. Additional options and controls are provided on
subsequent pages.
To enable the Hotspot service
1. Go to Configuration > Hotspot.
2. Click Enabled next to Hotspot Service.
3. Review the settings in table
Table 21. Hotspot configuration settings
Setting Description
UAM IP Address Specify the IP address of the UAM service.
Redirect unauth. Redirect unauthenticated users to the specified URL (login page).
user to
After user is Select where you want to redirect the user after successful
authenticated authentication.
• Redirect to the above URL: return to the login URL configured
above.
• Redirect to the URL the user intended to visit: upon successful
authentication, go directly to the URL that the user originally
entered (typically the browser's home page).
• Redirect to: specify a URL to which users are redirected after
authentication. This can be used to redirect users to a "Login
Successful" page, or a page that offers connection time
information or a Logout button.
Primary RADIUS Enter the IP address of the primary RADIUS server against which
Server users will be authenticated (required).
Secondary Enter the IP address of the secondary RADIUS server, if one is
RADIUS Server available (optional).
RADIUS Server Enter the shared secret for communication with the RADIUS server
Secret (required).
4. Click Update Settings to save your changes.
You have completed the minimum settings for providing Hotspot service on this AP.
Additional configuration options are available using the Edit Settings buttons at the
bottom of the page.
Table 21, and make changes as needed.
70