Zone Event Displays; Arming And Disarming Event Displays - Security Command XR20 User Manual

Zone Event Displays

This displays alarms, troubles, and other events that could occur on
your protection zones.
16-Character Display
2 BURG ALR 1017
32-Character Display
ALR 10:23P 10/17
BASEMENT DOOR
Zone Type - There are 7 possible zone types you may see here.
FIRE - Fire PANC - Panic
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are 6 event types you may see here:
ALR - Alarm TBL - Trouble
RST - Restore FLT - Zone Fault
LOW - Low battery MIS - Missing wireless transmitter
Note: LOW and MIS are for wireless systems only.
Appendix A
Description
A burglary alarm occurred on
zone 2. Press the right Select
key for the time the alarm
occurred.
Description
An alarm occurred at 10:23 PM
on Oct. 17. Press any Select
key to see the zone number
and zone type.
BURG - Burglary
XR20 User's Guide

Arming and Disarming Event Displays

This displays any arming or disarming of system areas.
16-Character Display
ARM 3 12 1017
32-Character Display
ARM 5:10P 10/ 17
WAREHOUSE
Arming Event Types - There are 2 event types you may see here:
ARM - User armed the system
DIS - User disarmed the system
Description
Area 3 was armed by user 12
on Oct. 17. Press the Select
key under 3 for the area name,
under 12 for the user name, or
under 1017 for the time the
arming occurred.
Description
The area was armed at 5:10
PM. Press any Select key to
display the area number and
user number.
29