Zone Event Displays; Arming And Disarming Event Displays; User Check-In Event Displays - Security Command XR20 User Manual

Zone Event Displays

This section displays alarms, troubles, and other events that could
occur on your protection zones.
32-Character Display
ALR 10:23P 10/17
BASEMENT DOOR
Zone Type - There are seven possible zone types you may see
here.
FIRE - Fire PANC - Panic
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are seven event types you may see here:
ALR - Alarm TBL - Trouble
FLT - Zone Fault SVC - Service Smoke Detector
LOW - Low battery MIS - Missing wireless transmitter
Note: LOW and MIS are for wireless systems only.
Appendix
Description
An alarm occurred
October 17 at 10:23 PM. Press
any Select key to see the zone
number and zone type.
BURG - Burglary
RST - Restore
XR20 User's Guide

Arming and Disarming Event Displays

This displays any system areas arming or disarming.
32-Character Display
ARM 5:10P 10/17
on
WAREHOUSE
Arming Event Types - There are two event types you may see
here:
ARM - User armed the system

User Check-in Event Displays

This shows when a user selected the pager Check-in feature from
the User Menu. See page 16 for more information.
32-Character Display
MSG 3: 31P 10/17
CHECKIN USER: 16
Description
The warehouse area was armed
at 5:10 PM. Press any Select
key to display the area number
and user number.
DIS - User disarmed the system
Description
User 16 selected the Check-in
feature at 3:31 PM
October 17.
on
35