Appendix B; Easy Entry™ User's Guide - Security Command XR20 User Manual

Easy Entry™ User's Guide
This section of the user's guide provides information on using the Easy Entry™ access control capability of the security command system.
If your system is not currently using any access control devices, disregard this section. Easy Entry™ is built into every Security Command
system and can be accessed using Easy Entry™ keypads.
There are three different operating modes: Door Strike, Arming and Disarming, and
Entry Delay. All of the examples below assume that your system requires a user code
to arm and disarm the protection.
DOOR STRIKE
Area and All/Perimeter Door Strike - From the Status List, present your
card to the reader. Once it is validated by the system, the Door Strike
relay activates. See Door Strike Relay Operation above.
systems only activate the Door Strike relay when arming and disarming.
ARMING AND DISARMING AN AREA SYSTEM
Press Command. The keypad displays ARM
Present your card to the reader. Once it is validated by the system, all areas accessible by you arm or disarm automatically and the Door
Strike relay activates.
ARM

Appendix B

DISARM. Press the Select key under either option. The keypad displays ENTER CODE: -.
ABC SECURITY
ABC SECURITY
ENTER CODE: –
DISARM
POWER POWER
Appendix B
Home/Away
XR20 User's Guide
ABC SECURITY
ALL? NO YES
POWER
31