Adding User Codes - Security Command XR20 User Manual

Adding User codes

1. Access the User Menu. Press the COMMAND key until USER
CODES? displays.
2. Press any Select key. The keypad displays ADD DEL CHG.
3. Press the Select key under ADD to add a new user code.
(You must have a Master user level to add a user.)
4. At the USER NUMBER:
press COMMAND.
5. The displays changes to CODE NO:. Enter the user code and
press COMMAND.
6. The display changes to MASTER?
make this a Master user level with the authority to access
all User Menu functions.
Select NO to make this a Standard user level. The following
options can then be selected:
6a. TEMP CODE NO YES.
Select NO to make this a permanent user code.
Select YES to make this a temporary code that automatically
expires in 7 days. Temporary codes are ideal for guests or
service technicians. You can delete a Temporary user code
at any time before the 7 day active period ends.
20
- prompt, enter a user number and
NO YES. Select YES to
6b. AREAS: . (Displayed in Area systems only).
Enter the area numbers where this user will have access.
For example: if you want this user to only have access to
areas 1 and 2, enter the numbers 1 and 2.
Once the correct area numbers are shown, press
Command.
6c. ARM ONLY
Select NO to allow this user to arm and disarm the system
and access all Standard level functions in the User Menu.
Select YES to restrict this user to arming only.
(The Arm Only user code can bypass zones not in a normal
condition at the time of arming.)
7. After you have completed making your selections, the
keypad display shows USER # ADDED. Press the Back Arrow
key once to add another user or twice to exit the User
Menu.
XR20 User's Guide
NO YES.
User Menu