Phoneaccess™ User's Guide; Quick Reference Wallet Card - Security Command XR20 User Manual

PhoneAccess™ User's Guide
This exciting feature allows you to call your XR20 system from any outside touch-tone phone to arm and disarm protection areas or turn
on or off the panel's relay outputs.
How it works
From a touch tone phone, call the system's phone number.
The XR20 answers and sounds a short ready tone. You now have
8 seconds to enter a valid Master user code. If the user code is
accepted by the panel, you will hear one or more beeps giving you
the current armed status of the system. (You can also Þ nd out the
armed status of the system by pressing the * key at any time.)
If
All areas are armed
Area 1 (Perimeter) is armed
Any area is armed
All areas are disarmed
If the user code is not accepted by the panel, you will hear four short
beeps. Check the user code and try again. After 3 unsuccessful
attempts to enter the code, the panel locks out PhoneAccess™ until
a valid user code is entered at a keypad.
Once the user code is accepted by the panel and the armed status
is given, you can enter the following commands:
Press To do this
#, 1 Arm all areas
#, 2 Arm area 1
#, 3 Arm areas 1 & 2
#, 0 Disarm all areas*
#, 5, 4, 0, n* Toggles the output 1 short beep = on
Note: Faulted zones are force armed when the area arms.
Appendix B
You will hear
3 short beeps
1 short beep
2 short beeps
1 long beep
You will hear
3 short beeps
1 short beep
2 short beeps
1 long beep
1 long beep = off
4 short beeps = restricted
XR20 User's Guide

Quick Reference Wallet Card

PhoneAccess™ Quick Commands
Press To do this
#, 1 Arm all areas
#, 2 Arm area 1
#, 3 Arm areas 1 & 2
#, 0 Disarm all areas*
#, 5, 4, 0, n* Toggles the output 1 short beep = on
Note: Faulted zones are force armed when the area arms.
1. _________________________ 3. _________________________
2. _________________________ 4. _________________________
PhoneAccess™ Quick Commands
Press To do this
#, 1 Arm all areas
#, 2 Arm area 1
#, 3 Arm areas 1 & 2
#, 0 Disarm all areas*
#, 5, 4, 0, n* Toggles the output 1 short beep = on
Note: Faulted zones are force armed when the area arms.
1. _________________________ 3. _________________________
2. _________________________ 4. _________________________
You will hear
3 short beeps
1 short beep
2 short beeps
1 long beep
1 long beep = off
4 short beeps = restricted
You will hear
3 short beeps
1 short beep
2 short beeps
1 long beep
1 long beep = off
4 short beeps = restricted
35