User Check-In Event Displays; User Code Change Event Displays; Supervisory Event Displays; System Monitor Event Displays - Security Command XR20 User Manual

User Check-in Event Displays

This shows when a user selected the pager Check-in feature from
the User Menu. See page 15 for more information.
16-Character Display
CHECKIN 16 1017
32-Character Display
MSG 3: 31P 10 / 17
CHECKIN USER: 16

User Code Change Event Displays

This displays any addition, deletion, or change to a user code.
16-Character Display
12 ADD 19 1017
32-Character Display
ADD 11:41A 10/ 17
US:19 BY US:12
User Code Event Types - There are 3 event types you may see here:
ADD - User added
DEL - User deleted
CHG - User code or authority level has been changed.
30
Description
User 16 selected the Checkin
feature on Oct. 17. Press the
right Select key for the Checkin
time.
Description
User 16 selected the Check-in
feature at 3:31 PM on Oct.17.
Description
User 12 added user 19 on Oct.
17. Press the right Select key
for the time this occurred.
Description
User 19 added by user 12 at
11:41 AM.
XR20 User's Guide

Supervisory Event Displays

This displays the date and time of an automatic test report.
16-Character Display
AUTO RECALL 1017
32-Character Display
MSG 11:58P 10/ 17
AUTO RECALL

System Monitor Event Displays

This displays any problems with the system's AC power, battery, or
phone line or any opening of a tampered panel box.
16-Character Display
POWER TBL 1017
32-Character Display
TBL 11:41A 10/ 17
POWER
System Monitor Event Types - There are 2 event types:
TBL - Trouble
RST - Restore
System Monitor Event Names - There are 2 system monitors:
AC POWER BATTERY
Description
The test report was sent on
Oct. 17.
Description
The test report was sent to the
central station at the date and
time shown.
Description
An AC failure occurred on Oct.
17. Press the Select key under
1017 for the time.
Description
An AC failure occurred at 11:41
AM. on Oct. 17.
Appendix A