Table of Contents
Advertisement
Schedules
User Code Level: Master only.
Function: The Schedules function allows you to program into the
system the times you normally turn your burglary protection on and
off each day of the week. This information can then be used by the
system to automatically arm or disarm the burglary protection.
You can also use the Closing Check/Extend feature with Schedules
to help ensure your system is armed by an authorized user at a
speciÞ c time. This option sounds the keypad buzzer and displays
CLOSING TIME! when a schedule expires. Users still on the premises
are reminded to arm the system or extend the schedule to a later
time. If the system is not armed, or the schedule not extended, a
report can be sent to the central station and/or a pager.
Your system provides you with two different types of schedules:
Permanent schedules are used for automatic arming and disarming
and always occur at the same time until you change or delete
them.
Extend schedules allow an authorized user to extend the present
day's permanent scheduled closing time.
22
Setting an Arming and Disarming Schedule
1.
Access the User Menu.
2.
Press the COMMAND key until SCHEDULES? displays. Press
any Select key. The keypad displays PRM EXT. Press the
Select key under PRM.
3.
The keypad next displays the day of the week you want
the schedule to start as SUN MON TUE WED. Press the
COMMAND key to show the remaining days of the week and
then press the Select key under your choice.
4.
The keypad then displays OP (open) 00:00 PM MON followed
by CL (close) 00:00 PM MON and DELETE KEEP. Press the
Select key under DELETE.
The keypad displays OPENING TIME?. Press COMMAND. The
keypad now displays MON – :
want the burglary protection to be turned off. Use a 12
hour clock only (00:01 to 11:59). Press the Select key under
AM or PM.
5.
The keypad then displays CLOSING TIME?.
COMMAND key. The keypad then displays MON – :
PM. If you want the schedule to be for consecutive days,
press the Select key under MON to increment the days of
the week. When the correct day is shown, enter the time
you want the burglary protection to turn on.
6.
To clear a schedule, press DELETE and then AM when the
opening time is requested.
Press the Back Arrow key to exit the User Menu.
XR20 User's Guide
AM PM. Enter the time you
Press the
AM
User Menu
Advertisement
Table of Contents
