Table of Contents
Advertisement
Many of the features of your system have been put into a User Menu
that you can access from any Security Command keypad. The menu
requires you to enter your user code and then it only shows those
functions to which you have access.
Accessing the User Menu
1.
Press the COMMAND key until MENU? NO YES displays.
2.
Select YES. The keypad displays ENTER CODE: –. Enter
your user code and press COMMAND. You can now scroll
down through the list of system features available to you.
User Menu Options
The list below shows the User Menu options in order:
Menu Option Description
USER CHECKIN
Allows monitoring of children coming home
from school.
ACTIVITY CHECK
Monitor a zone for non-activity.
SENSOR RESET
Resets smoke or glassbreak detectors that
have latched due to an alarm condition.
OUTPUTS ON/OFF Allows you to turn on or off any of the outputs
described in the System Setup section of this
guide.
BYPASS ZONES
Allows you to Bypass a zone or reset an already
bypassed zone.
ZONE MONITOR
Allows you to add or remove a zone from the
monitor mode.
14
User Menu
SYSTEM TEST
USER CODES
SCHEDULES
TIME
DISPLAY EVENTS
SERVICE REQUEST Allows you to send a message to the Central
XR20 User's Guide
Tests the system's siren, communication to
the central station, and backup battery.
Allows you to add, delete, or change user
codes and authority levels.
Allows you to add, remove, or change system
schedules.
Allows you change the Day, Date, or Time that
is currently in the system.
Allows you to view or print the last 200 system
events that occurred on your system.
Station requesting service on the alarm
system.
Arming and Disarming
Advertisement
Table of Contents
