Configuring Is-Isv6 Interface Parameters - Zte ZXR10 5900E Series User Manual

St- Command
ep
8
ZXR10(config-router)#
9
ZXR10(config-router)#
| level-1-2}
10
ZXR10(config-router)#
11
ZXR10(config-router)#
12
ZXR10(config-router)#
13
ZXR10(config-router)#
14
ZXR10(config-router)#
wide}[level-1 | level-2 | level-1-2]
15
ZXR10(config-router)#
connected | ospf | rip | static}[[level-1 | level-2 |
level-1-2]| metric <0-4261412864>|}
16
ZXR10(config-router)#
{external [interlevel]| interlevel [external]}|
on-startup <5-86400>[suppress {external
[interlevel]| interlevel [external]}]]
17
ZXR10(config-router)#
level-2]
18
ZXR10(config-router-af)#
X:X::X:X/<0-128>[ level-1 | level-1-2 | level-2 ]
St- Command
ep
1
ZXR10(config-if-vlanX)#
<word>[level-1 | level-2]
2
ZXR10(config-if-vlanX)#
{md5 | text}[ level-1 | level-2]
ignore-lsp-errors
is-type {level-1 | level-2-only
lsp-refresh-time <1-65535>
maximum-paths <1-8>
max-lsp-lifetime <1-65535>
lsp-mtu <512-1497>
metric-style {narrow |
redistribute {{bgp |
set-overload-bit [suppress
spf-interval <1-120>[level-1 |
summary-prefix
Configuring IS-ISv6 Interface
Parameters
To configure interface parameters, perform the following steps.
isis authentication
isis authentication-type
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 IS-ISv6 Configuration
Function
This configures IS-ISv6 ignore
LSP error.
This configures route level.
This configures LSP refresh
time.
This configures maximum
route number at IS-ISv6
route configuration mode.
This configures LSP lifetime.
This configures LSP mtu.
This configures metric type of
router.
This configures route
redistribution from other
route protocols, static route
and direct connected route.
This sets overload-bit in its
own LSP message.
This configures the minimum
interval that configures
IS-ISv6 topology.
This configures IS-ISv6 route
aggregation.
Function
This configures IS-ISv6
authentication on the
interface.
This configures IS-ISv6
authentication type on the
interface.
43