Configuring Bgp4+ Ipv6 Address Family - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (IPv6 Volume)
St- Command
ep
5
ZXR10(config-router)#
er-group-name>} passive
6
ZXR10(config-router)#
peer-group [<group-name>]
7
ZXR10(config-router)#
er-group-name>} shut-down
8
ZXR10(config-router)#
er-group-name>} timers <keepalive><holdtime>
9
ZXR10(config-router)#
ess>|<peer-group-name>} update-source
{loopback<interface number>|supervlan <interface
number>|vlan <interface number>}
St-
Command
ep
1
ZXR10(config-router)#
2
ZXR10(config-router-af)#
>|<peer-group-name>} default-originate
3
ZXR10(config-router-af)#
>|<peer-group-name>} maximum-prefix <value>
4
ZXR10(config-router-af)#
>|<peer-group-name>} next-hop-self
5
ZXR10(config-router-af)#
><peer-group-name>} remove-private-as
6
ZXR10(config-router-af)#
>|<peer-group-name>} send-community
7
ZXR10(config-router-af)#
>|<peer-group-name>} soft-reconfiguration
58 Confidential and Proprietary Information of ZTE CORPORATION
neighbor {<ipv6-address>|<pe
neighbor <ipv6-address>
neighbor {<ipv6-address>|<pe
neighbor {<ipv6-address>|<pe
neighbor {<ipv6-addr
Configuring BGP4+ IPv6 Address
Family
To configure IPv6 address family, perform the following command.
address-family ipv6
neighbor {<ipv6-address
neighbor {<ipv6-address
neighbor {<ipv6-address
neighbor {<ipv6-address
neighbor {<ipv6-address
neighbor {<ipv6-address
Function
This makes a router not send
open messages to neighbors.
This creates a peer group and
add a neighbor to this group.
This administratively shuts
down a neighbor.
This sets related timers of a
neighbor.
This sets source address
that is used to establish TCP
connection with neighbor.
Function
This enters IPv6 address
family configuration mode
This sends default route to
specified neighbor
This sets the maximum
number of route entries from
neighbors
This sets self to be the next
hop
This filters private AS in
routes that are advertised to
neighbors
This sends community
attribute to neighbor when
advertising routes
This sets a neighbor to
support soft reconfiguration