Ipv6 Tunnel Maintenance And Diagnosis - Zte ZXR10 5900E Series User Manual

St- Command
ep
1 show ipv6 interface tunnel<tunnel-number
ZXR10#
>[brief]
2 debug ipv6 packet interface tunnel<tunnel-n
ZXR10#
umber>
ZXR10_R2(config-if-vlan4)#ip address 31.1.1.2 255.255.255.0
ZXR10_R2(config-if-vlan4)#exit
ZXR10_R2(config)#interface vlan5
ZXR10_R2(config-if-vlan5)#ipv6 enable
ZXR10_R2(config-if-vlan5)#ipv6 address 5000::128/64
ZXR10_R2(config-if-vlan5)#ipv6 rip enable
ZXR10_R2(config-if-vlan5)#exit
ZXR10_R2(config)#ipv6 route 4000::/64 tunnel2
IPv6 Tunnel Maintenance
and Diagnosis
To configure IPv6 tunnel maintenance and diagnosis, perform the
following steps.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 IPv6 Tunnel Configuration
Function
This views information of
tunnel interface.
This views information of
messages that are sent and
received on tunnel interface.
19