Other Configuration Commands; Maintenance And Diagnosis Commands - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (IPv6 Volume)
St- Command
ep
3
ZXR10(config-if-vlanX)#
<ipv6_address>[interface]
4
ZXR10(config)#
<1 4094>
5
ZXR10(config)#
Command
ZXR10(config-if-vlanX)#
ZXR10(config-if-vlanX)#
ZXR10(config-if-vlanX)#
}<access-list-name>
show ipv6 mtu
ZXR10(config)#
show ipv6 acl
ZXR10(config)#
Command
ping6 <ipv6-addres>s [interface {<interface-name
ZXR10#
>}| num <165535>| size <648192>| timeout <160>]
trace6 <ipv6-address>[ max-ttl <1254>| timeout
ZXR10#
<1 100>]
telnet6 <ipv6-address>[interface <interface-na
ZXR10#
me>]
24 Confidential and Proprietary Information of ZTE CORPORATION
ipv6 dhcp relay destination
show ipv6 dhcp interface vlan
show ipv6 dhcp configure
Other Configuration
Commands
ipv6 mtu <bytes>
ipv6 dad-attemps <number>
ipv6 acl { extended | standard
Maintenance and Diagnosis
Commands
For convenient maintenance and diagnosis, ZXR10 5900E provides
the related commands.
Function
This configures relay
forwarding parameter at
the interface mode.
This views dhcpv6 interface
configuration.
This views IPv6 DHCP global
configuration message.
Function
This configures maximum
transmission unit (MTU) which
sends IPv6 message on the
interface.
This configures the times of
repeat address detection on the
interface.
This configures IPv6 acl rule.
This views route MTU cache
table information.
This views ipv6 acl entry
information.
Function
This diagnoses if the link to a
specific destination is normal.
This diagnoses the real route to
a specific destination.
This opens a IPv6 Telnet
connection.