Ipv6 Header - Zte ZXR10 5900E Series User Manual

T 9 IPV6 MULTICAST RANGE VALUE
ABLE
Value
1
2
5
8
E
3. Group ID is used to define a permanent multicast group or a
temporary multicast group in some range.
An IPv6 node (router or host) should be added to the following
multicast groups:
All node multicast groups FF02:0:0:0:0:0:0:1 (local link)
�
Request node multicast groups
�
Request node
FF02:0:0:0:0:1:FF00:0000/104 and low 24 bits of IPv6
address (unicast address or anycast address). For exam-
ple, request node multicast address that is related to IPv6
address 4037::01:800:200E:8C6C is FF02::1:FF0E:8C6C.
Request node multicast address is used in neighbor request
information.

IPv6 Header

IPv4 header is shown in
T 10 IPV4 HEADER
ABLE
4-bit 4-bit 8-bit type of
ver- header service (TOS)
sion length
16-bit identifications
8-bit time to live 8-bit protocol
(TTL)
32-bit source IP address
32-bit destination IP address
24-Options
Data
IPv6 header is shown in
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 IPv6 Address Configuration
Local organization
multicast address
Table 10.
16-bit total length (in byte)
4-bit
12-bit fragment offset
flags
16-bit header checksum
Table 11 .
Range
Local node
Local link
Local site
Global
consists of prefix
8-filling
7