Printing Multiple Copies - Xerox LF8140.8145 User Manual

Set Page Adjustment
Set Page Adjustment
Received faxes can automatically be adjusted to the paper format inserted. You can also en-
ter a fixed value (percentage) for the paper adjustment
Setting the Paper Format
Notice
Setting the Paper Format
For automatic adjustment, the format of the inserted paper must be set correctly
(see also chapter
Press OK, 4024 and OK.
1.
Use [ to select automatic adjustment or whether you would like to enter a fixed value.
2.
Confirm with OK.
3.
Enter a Fixed Value: Enter a percentage for the compression between 70 and
4.
100 percent.
Confirm with OK.
5.
Set a Threshold for Pagination
Set a Threshold for Pagination
Some fax transmissions contain more lines than can be printed. Using the threshold for pag-
ination, set from which value these lines are printed on the second page. All lines below this
value are deleted.
Press OK, 4027 and OK.
1.
Use [ to select from the following settings:
2.
ON
—All lines which lie more than three centimetres outside the page are printed on a
second page. All surplus lines below this value are deleted.
OFF
—All lines which lie more than one centimetre outside the page are printed on a
second page. All surplus lines below this value are deleted.
Confirm with OK.
3.

Printing Multiple Copies

Printing Multiple Copies
You can apply settings to your device whereby multiple copies of fax transmissions are print-
ed out upon reception.
Press OK, 4022 and OK.
1.
Enter a value from 1 to 99.
2.
Confirm with OK.
3.
Spaltenumbruch
Setting the Paper Format
Settings · Additional Fax Reception Options¦ 91
, page 85).
EN