Chain Dialling; Insert Dialling Pause; Dialling With The Handset Replaced - Xerox LF8140.8145 User Manual

Incorrect Outside Line Access Code
Notice
EN
Incorrect Outside Line Access Code
In rare cases, the outside line access code may be a different number or a two-digit
number. For older telephone systems, the outside line access code can be R (= Flash).
Press Rø to enter this outside line access code. If the connection to the public tel-
ephone network is not possible, contact your telephone system supplier.
Setting Up an Extension
Notice
Connection to Private Automatic Branch Exchange
If you operate your device permanently on an extension, save the outside line ac-
cess code (see also chapter on

Chain Dialling

You can combine and edit manually entered digits and saved entries, before the dialling proc-
ess starts. If you have saved, for example, the telephone number prefix of an inexpensive tel-
ephone service provider (call-by-call) as a telephone book entry, select this entry and manu-
ally enter the subsequent telephone number or select another saved entry.

Insert Dialling Pause

Insert Dialling Pause
It may be necessary to insert a dial pause in telephone number, for example, for a direct-in-
ward dialling number, a sub-address or in a long distance number. Press ú and Rø. The sec-
ond part of the number is dialled only after a short pause.

Dialling with the Handset Replaced

Press μ to dial without lifting up the handset. You will hear the dial tone from the loud-
1.
speaker; the dialling process will commence immediately. Select the desired volume lev-
el using [.
2. Pick up the hand-set when the subscriber accepts the call.
Notice
Spaltenumbruch
36 ¦ Telephone Functions · Chain Dialling
No Hands-free Operation Possible
Hands-free operation is not possible with this function. You cannot answer if
the subscriber picks up.
setting Private Branch Exchange (PABX)
, page 98).