En Setting The Ring Tones; Deactivating The Button Tones - Xerox LF8140.8145 User Manual

Entering Name
EN
Press OK, 021 and OK.
1.
2. Enter the name using the keys (A—Z).
Confirm with OK.
3.
Entering Number
Press OK, 022 and OK.
1.
2. Enter your number.
Confirm with OK.
3.
Setting the Ring Tones
Selecting the Ring Tone
Selecting the Ring Tone
You can use this function to select the standard ring tone. You can assign a separate ring tone
to entries in the telephone book (see also chapter on
Press OK, 054 and OK.
1.
Select the desired ring tone using [.
2.
Confirm with OK.
3.
Adjusting Volume Level
Press OK, 055 and OK.
1.
Select the desired volume level using [.
2.
Confirm with OK.
3.
Setting the Number of Rings
Setting the Number of Rings
You can use this function to set the number of rings for the fax reception mode. After the se-
lected number of rings, the device switches to fax reception in the fax mode. Select
switch off the ring tone completely (see also chapter on
Press OK, 042 and OK.
1.
Select the desired number of rings using [.
2.
Confirm with OK.
3.

Deactivating the Button Tones

Deactivating the Button Tones
Every key press is accompanied by a sound. You can switch off the key tones on your device.
Press OK, 007 and OK.
1.
Use [ to select whether you would like to turn the function on or off.
2.
Confirm with OK.
3.
84 ¦ Settings · Setting the Ring Tones
saving an entry
, page 40).
silent fax reception , page 89).
0
to