Start Fax Reception from Additional Telephone
Notice
Start Fax Reception from Additional Telephone
You can start the fax reception from an additional telephone that is connected to
the device by pressing *5:
Chain Dialling
You can combine and edit manually entered digits and saved entries, before the dialling proc-
ess starts. If you have saved, for example, the telephone number prefix of an inexpensive tel-
ephone service provider (call-by-call) as a telephone book entry, select this entry and manu-
ally enter the subsequent telephone number or select another saved entry.
Eavesdropping while Connection is
Established
Eavesdropping while Connection is Established
You can listen while a connection is established, for example if a fax transmission constantly
fails.
Enter the desired number using the numeric keypad or select a saved entry. Press μ.
No Hands-free Operation Possible
Notice
No Hands-free Operation Possible
Hands-free operation is not possible with this function. You cannot answer if the
subscriber picks up.
Sending to Multiple Recipients
(= Broadcasting)
Broadcast Transmissions
You can send one fax to multiple recipients in succession.
Using fax transmission from the memory
This function is only available if you have set up your device in such a way that fax messages
are sent from the memory (see also chapter on
page 89).
1.
Insert the document.
2.
Enter the desired number using the numeric keypad or select a saved entry.
Press À.
3.
Enter the next telephone numbers. Between the individual recipients, press À. You can
4.
enter up to 20 recipients.
Notice
Sending a Fax to a Group
A group from the telephone book is an entry in the list of recipients.
If a number appears in the list of recipients several times, (for example, is saved
in different groups), the message is sent to this number several times.
Press FAX or o. The device transmits the fax message successively to all recipients.
5.
setting up fax messages from the memory
Fax · Chain Dialling¦ 59
EN
,