Set Up Private Branch Exchange (Pabx) - Xerox LF8140.8145 User Manual

Set up Private Branch Exchange (PABX)

EN
PABX Systems
Private branch exchanges (PABX) are typical in many offices and some households. You must
dial an outside line access code in order to get a connection to the public telephone network
(PSTN) from a PABX.
Additional Telephone No Extension
Notice
Additional Telephone No Extension
An additional telephone connected to the device on a telephone socket is not con-
sidered an extension.
Set up Private Branch Exchange (PABX)
You can set up your device for operation on an extension, indicate the length of the internal
numbers (direct dial number) and save the code which must be selected in order to reach the
Public Switched Telephone Network (PSTN) (= outside line access code).
Outside Line Access Code is Automatically Dialled
Notice
Outside Line Access Code is Automatically Dialled
Once these settings are in place, you will no longer need to prefix the outside line
access code every time you enter an external number. The device will automatically
add the outside line access code in front of numbers that are the same length or
longer than the configured direct dial numbers.
Set the connection type
Press OK, 051 and OK.
1.
Use [ to set whether you operate your device on an extension.
2.
Confirm with OK.
3.
Setting the Outside Line Access Code
Enter the length of the direct dial number
Press OK, 0521 and OK.
1.
Enter the appropriate length for internal numbers. Use C to delete individual characters.
2.
Assume the longest internal number, then add one digit to that. If your direct dial num-
bers consist of four digits, then you should input5.
Confirm with OK.
3.
Enter the outside line access code
Press OK, 0522 and OK.
1.
2. Enter the outside line access code with which you reach the public telephone network.
This is usually 0.
98 ¦ Telephone Lines and Additional Devices · Set up Private Branch Exchange (PABX)