Manual Mode; Fax Mode - Xerox LF8140.8145 User Manual

Manual Mode

EN
Manual Mode MANUAL
(
Manual Mode
The device will not receive faxes on its own. You can start fax reception manually, by pressing
o. This setting is useful, when you want to receive faxes via a modem connected to a com-
puter.

Fax Mode

FAX
Fax Mode
( )
Fax Mode
In the fax mode, the device will ring for as many times as you have set with function 042 (also
see chapter
should select this mode if you primarily receive faxes at your device.
EXT/Answering Machine Mode
EXT/Answering Machine Mode FAX-ANSWER
(
EXT/Answering Machine Mode
You should set the device to this mode if you have additional devices connected to the Ï/
EXT. socket of your device. If an additionally connected answering machine receives a call,
your device will check to determine whether or not the incoming call is a fax transmission. If
the device recognises a fax signal, it will automatically receive the fax transmission.
Answering Machine
If you do not have an answering machine connected or if a connected answering machine
does not accept the call, the device will take over the call after a predetermined number of
rings and automatically receive any possible fax transmission being sent.
Fax Switch 1
Notice
Fax at Additional Telephone
If you pick up at an additional device and hear that you are receiving a fax (whis-
tling tone or silence), you can start the fax reception by pressing *5 on the ad-
ditional telephone or pressing o on the device. To use this function, additional tel-
ephones must be set to the tone dialling mode (DTMF/MFV tones) (for this purpose
see the operating manual of your additional telephone).
Automatic Mode
Type 3 (mit Telefon)
(LF8145)
Automatic Mode AUTOMATIC
(
Automatic Mode
If the Automatic Mode is active, the device will check to determine whether the incoming call
is a fax transmission or a telephone call. The device will automatically receive fax transmis-
sions. While the device is checking the call, it continues to ring. You can accept telephone calls
at any time. After a predetermined number of rings, the device will take over the call and au-
tomatically receive a possible silent fax transmission.
88 ¦ Settings · Setting the Fax Reception Mode
)
Setting the Number of Rings
)
)
, page 84). Then the fax reception switches on. You