1.
Insert a white piece of paper into the document feeder.
EN
Press OK, 931 and OK.
2.
Confirm with OK.
3.
4.
Wait until calibration is completed and the device returns to starting mode.
Using Service Codes
Introduction
The service codes delete all the changed settings and your device is reset to factory settings.
It may be possible that the device with the changed settings reacts differently than expected.
Using Service Codes
Settings will be Deleted!
Only use the service codes if this is absolutely necessary. Some service codes also de-
lete saved messages and telephone book entries.
Press OK, 933 and OK.
1.
2.
Enter a service code:
70158—Deletes all changed settings. Saved data and telephone book en-
tries remain intact.
70026—Deletes saved faxes, when there are problems with printing.
Confirm with OK.
3.
Use [ to select
4.
Confirm with OK.
5.
Notice
118 ¦ Service · Using Service Codes
YES
.
Cancelling Entry
If you have entered the incorrect code, you can cancel the entry with
CAUTION!
NO
.