Connecting The Telephone Cable; Connecting The Mains Cable - Xerox LF8140.8145 User Manual

Connecting the Telephone Cable

EN
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting it in the socket designated with Î/
LINE (RJ-11-Connector). Insert the telephone plug into your PTT line socket.
Telefonkabel anschließen
Connection to an ISDN system!
Connection to an ISDN system!
You can not connect your devices directly to the digital output of the ISDN system.
Details for ISDN connections can be found in the instructions provided with the ter-
minal adapter or the dial-up router.
PABX Systems 1
Notice
Connection to Private Automatic Branch Exchange
If you connect your device as extension to a telephone system, you must set it for
working as an extension (also see Chapter
page 97).

Connecting the Mains Cable

Mains Voltage at the Site of Installation
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device (indicated on the type label)
matches the mains voltage available at the setup location.
1. Insert the mains cable into the connection located on the rear side of the device. Plug
the power cable into the electrical outlet.
32 ¦ Initial Operation · Connecting the Telephone Cable
CAUTION!
Telephone Lines and Additional Devices
CAUTION!
,