Configure The Paging Groups (Pgroups) Parameters - CyberData VoIP V3 Operation Manual

Paging server

Hide thumbs Also See for VoIP V3:

Table of Contents

2.4.9 Configure the Paging Groups (PGROUPS) Parameters

Note

1. Click on the PGROUPS Setup button to open the PGROUPS Setup page. See

CyberData Corporation

A PGROUP is a way of assigning multicast addresses and port numbers when configuring

multicast paging speakers.

To assign a multicast address, you must first configure the CyberData VoIP speakers that

you want to put into a paging zone by entering a particular multicast address and port

number combination in the web configuration for these speakers.

930427B

Figure 2-17. PGROUPS Setup

Setting Up the V3 Paging Server

Configuring the V3 Paging Server

Figure

2-17.

Operations Guide

Table of Contents

Do you have a question about the VoIP V3 and is the answer not in the manual?