Upgrade The Firmware - CyberData VoIP V3 Operation Manual

Paging server

Hide thumbs Also See for VoIP V3:

Table of Contents

2.5.0.1 Upgrade the Firmware

To upload the firmware from your computer:

1. Retrieve the latest V3 Paging Server firmware from the VoIP V3 Paging Server Downloads page

at:

http://www.cyberdata.net/products/voip/digitalanalog/pagingserverv3/downloads.html

2. Unzip the V3 Paging Server version file. This file may contain the following:

•

3. Log in to the V3 Paging Server home page as instructed in

Configuration

4. Click the Update Firmware button to open the Upgrade Firmware page. See

5. Click Browse, and then navigate to the location of the V3 Paging Server firmware file.

6. Click Submit.

Note

CyberData Corporation

Firmware file

Release notes

GUI".

This starts the upload process. Once the V3 Paging Server has uploaded the file, the

Uploading Firmware countdown page appears, indicating that the firmware is being

written to flash. The V3 Paging Server will automatically reboot when the upload is

complete. When the countdown finishes, the Upgrade Firmware page will refresh. The

uploaded firmware filename should be displayed in the system configuration (indicating

successful upload and reboot).

930427B

Setting Up the V3 Paging Server

Upgrading the Firmware

Section 2.4.3, "Log in to the

Figure

Operations Guide

2-27.

Table of Contents

Do you have a question about the VoIP V3 and is the answer not in the manual?