Confirm That The V3 Paging Server Is Up And Running; Confirm Power On, Network Connectivity, And Connection Speed; Verify Network Activity; Announcing The Ip Address - CyberData VoIP V3 Operation Manual

2.3.5 Confirm that the V3 Paging Server is Up and Running

The LEDs on the front of the V3 Paging Server verify the unit's operations.

2.3.5.1 Confirm Power on, Network Connectivity, and Connection Speed

When you plug in the Ethernet cable or power supply:
• The round,
that the power is on. Once the device has been initialized, this LED blinks at one second
intervals.
• The square,
connection has been established. The Link LED changes color to confirm the auto-negotiated
connection speed:
•
•
• The
when a page is in progress. You can disable Beep on Initialization on the Device Configuration
page.

2.3.5.2 Verify Network Activity

The square,

2.3.6 Announcing the IP Address

To announce the IP address for the V3 Paging Server, briefly press and then quickly release the
RTFM switch. See
CyberData Corporation
GREEN/BLUE
GREEN/AMBER
The Link LED is GREEN
The Link LED is AMBER
Paging LED comes on after the device is booted and initialized. This LED blinks
GREEN
GREEN Activity LED blinks when there is network traffic.
Figure 2-8.
RTFM Switch
Figure 2-7. Paging Server LEDs
Status LED on the front of the V3 Paging Server comes on indicating
Link LED above the Ethernet port indicates that the network
at 10 Mbps.
at 100 Mbps.
Figure 2-8. RTFM Switch
930427B
Setting Up the V3 Paging Server
Connecting the V3 Paging Server
Link
(GREEN/ LED)
AMBER
Activity
(GREEN LED)
Status
(GREEN/BLUE LED)
Paging
(GREEN LED)
Operations Guide
10