Copy A Directory Entry To One Touch - VTech EriseBusinessSystem UP406 User Manual

Directory
Dial, delete or edit entries

Copy a directory entry to one touch

1. When a directory entry appears, press
2. Press or
3. The screen displays Enter Number. Use the dialing
keys to edit the number.
Press DELETE to delete a digit.
•
Press /REPEAT or /SKIP to move the cursor to
•
the left or right.
• You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or
SELECT. A P appears on the screen.
MENU/
• Store a signal for switching to temporary tone
signaling. If you have dial pulse (rotary) service,
this signal is required for some special services.
Press or
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
• You can store the flash signal required by some special services as part
of a dialing sequence. Press
SELECT. An F appears on the screen. Continue storing the number
MENU/
as usual.
4. Press or
5. The deskset displays Press a 1-touch key to save the number.
• Press the one-touch button for the destination party in the upper location.
-OR-
Press LOWER, then press the one-touch button for the destination party in the
•
lower location.
6. The deskset displays Number saved to 1-touch key.
to choose Copy to 1-touch, then press
to choose Add pause, then press
to choose Send tone, then press
to scroll to Done, then press
SELECT.
MENU/
to choose Add flash, then press
or
SELECT.
MENU/
62
SELECT.
MENU/
32/50
Christine Smith
Edit
>Copy to 1-touch
Delete
Enter Number:
8005959511_
Select to:
Done
SELECT.
MENU/