Call Transfer; Blind Transfer - VTech EriseBusinessSystem UP406 User Manual

4-line office phones deskset
Hide thumbs Also See for EriseBusinessSystem UP406:
Table of Contents

Advertisement

Telephone operation

Call transfer

You can transfer a call to any other system telephone. Only the recipient
extension can answer the transferred call; other extensions cannot seize the
line at that moment.

Blind transfer

While on a call, you can transfer a call directly without notifying the
desired extension:
1. Press TRANSFER
call is put on hold.
2. Press
or
SELECT.
press
MENU/
-OR-
Use the dialing keys to dial the extension number.
3. The destination device rings. Choose either
option below.
Answer the call by lifting the corded handset, or
pressing SPEAKER
You can resume the call by pressing the
corresponding flashing line key (LINE 1-LINE 4) on
the deskset before the destination device answers
the call.
4. Put the corded handset on the deskset or press SPEAKER
NOTES:
If the private mailbox of the destination extension is off, the transferred call will only ring on the
destination extension for five minutes. If the destination extension does not answer within that period,
the transferred call ends.
If the private mailbox of the destination extension is busy, the call ends.
If the destination extension does not answer within five minutes, the extension which initiated the
transfer can retrieve the call by pressing the corresponding line key.
on the deskset
to scroll to the desired extension, then
.
while on a call. The
51
Transfer to:
>Reception
Meeting room
Ext 13
to hang up.
11
12
13

Advertisement

Table of Contents
loading

Table of Contents