Table of Contents
Advertisement
Telephone operation
Telephone operation
The deskset comes programmed to select a line automatically for calls when
you do not press a line key. To override the automatic line selection setting,
see Prime line on page 25 for details. When you answer a call, the deskset
automatically selects the ringing line.
Line indicators
Each of the four indicators on LINE 1-LINE 4
indicate the state of the corresponding
telephone line.
• On when the corresponding line is in use.
• Flashes slowly when the line is on hold.
• Flashes rapidly when there is an incoming call on
the corresponding line.
Making and ending a call
To make a call from the deskset:
1. Lift the handset or press SPEAKER
-OR-
To override automatic line selection, press LINE 1-
LINE 4 for the desired line, then lift the handset.
2. Wait for a dial tone, then enter the telephone number.
The screen displays the elapsed time as you talk (in
hours, minutes and seconds).
To end a call from the deskset:
• Place the handset on the deskset to hang up.
-OR-
• Press the corresponding line key (LINE 1-LINE 4) to hang up.
-OR-
• If you are using the speakerphone, press SPEAKER
NOTE: The elapsed time is not affected by accessing services from your telephone service provider.
.
37
L1
Line 1 00:00:01
to hang up.
Advertisement
Table of Contents
