Table of Contents
Advertisement
Getting started
Deskset installation
4. Connect the Ethernet cable and power adapter as shown below.
NOTES:
•
Use only the power adapter supplied with this product. To order a replacement power adapter,
visit our website at businessphones.vtech.com or call 1 (800) 595-9511. In Canada, please
dial 1 (800) 267-7377.
•
If you want to use an occupied Ethernet wall jack, use the PC port on the deskset as an Internet pass-
through. For details, see Use the existing Ethernet wall jack on page 8.
6
Plug the large end
of the deskset
power adapter into
an electrical outlet
not controlled by a
wall switch.
Route the power
cord through the
slots.
Plug the small end
of the deskset power
adapter into the power
jack at the back of the
deskset.
Plug the other end of the
Ethernet cable into the
Ethernet switch or router
connecting to your console.
11
Ethernet switch/
Router
Router
Route the Ethernet
cable through the
slots.
MS2015 Engraving:
Plug one end of the
MS2085 Engraving:
Ethernet cable into the
Ethernet port (
) at the
back of the deskset.
Use only
Supplied
Adapter
Use only
Supplied
L4
Adapter
5.1
Advertisement
Table of Contents
