Table of Contents
Advertisement
Telephone operation
Redial
The last 10 telephone numbers dialed (up to 30 digits) are stored in system
memory. If there is a cordless handset registered to this deskset, the redial
memory is shared between the deskset and its registered cordless handset.
To view the 10 most recently dialed numbers
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press
or
3. Press CANCEL to exit the redial list.
To redial a number
When the desired number displays on the screen:
• Lift the handset.
-OR-
• Press SPEAKER
To override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
To copy a redial entry to directory
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press
or
3. Press /REPEAT or /SKIP to choose Copy to DIR, then press
4. The deskset displays Enter Name. Use the dialing keys to enter the name
(up to 15 characters).
Press /REPEAT or /SKIP to move the cursor to the left or right.
•
Press DELETE to delete a character.
•
SELECT to save. The deskset displays Enter Number. Use the
5. Press
MENU/
dialing keys to enter the number (up to 30 digits).
Press DELETE to delete a digit.
•
Press /REPEAT or /SKIP to move the cursor to the left or right.
•
•
You can include a pause while storing a dialing sequence that requires
one during actual dialing. Press
SELECT. A P appears on the screen.
MENU/
•
Store a signal for switching to temporary tone signaling. If you have dial
pulse (rotary) service, this signal is required for some special services.
Press
or
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
to view other recently called numbers.
or HEADSET.
to view other recently called numbers.
to choose Send tone, then press
to choose Add pause, then press
or
MENU/
44
SELECT.
MENU/
SELECT. A T appears
Advertisement
Table of Contents
