Table of Contents
Advertisement
Getting started
System setup
Network setup (continued)
SELECT to proceed. The screen displays
7. Press
MENU/
Router/Gateway: XXX.XXX.X.XXX. Use the dialing
keys to enter a specific gateway.
Press DELETE to delete a digit.
•
Press # to add a dot.
•
Press /REPEAT or /SKIP to move the cursor to
•
the left or right.
SELECT to save. The screen displays
8. Press
MENU/
IP obtained: XXX.XXX.X.XXX Check network info?
SELECT to read the network info, or press
Press
MENU/
CANCEL to return to the main menu.
•
If the IP entered is invalid, the screen displays
IP is invalid. briefly, and then returns to the
Enter static IP screen.
9. Reboot the deskset to update the IP .
Discovery method
Use this feature to change the connection mode of the deskset when you
changed to a different Ethernet switch or router. By default, the discovery
method is set to Mode B.
To change the discovery method:
1. When the deskset is idle, press MENU
2. Press
or
SELECT or /SKIP.
MENU/
3. Press
or
SELECT or /SKIP.
MENU/
4. Press
or
SELECT or /SKIP.
press
MENU/
5. Press
or
Mode B (Default), then press
/SKIP to save the setting. To exit without making
changes, press CANCEL.
to scroll to System Setup, then press
to scroll to Network Setup, then press
to scroll to Discovery method, then
to scroll between Mode A or
.
/SELECT
SELECT or
MENU/
28
Router/Gateway:
192.168.1._
<'#' = Add dot>
IP obtained:
192.168.1.3
Check
network info?
Network Setup
Auto set IP
Set static IP
>Discovery Method
Discovery Method
Mode A
>Mode B (Default)
Advertisement
Table of Contents
