End or leave a PTT call
Using a handset or the telephone
base:
For one-to-one PTT calls, both initiating
and destination devices can end the
PTT call. For PTT calls to multiple
devices, the initiating device can end the
PTT call. If any one of the destination
devices leaves the PTT call, the call
continues until all participants or the
initiator hangs up.
Press CANCEL or
or telephone base. The screen shows
Push to talk Ended.
-OR-
Place the handset in the telephone
base or charger, then the handset
return to idle mode.
NOTE
After PUSH TO TALK on the handset or PTT
on the telephone base is released, the PTT
call remains open for a short time. If no one
presses PUSH TO TALK on the handset
or PTT on the telephone base within ten
seconds, the PTT call ends automatically.
END
on the handset
Redial
The base and each handset store the last
10 telephone numbers dialed. When there
are already 10 entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
Press REDIAL on the handset or
1.
telephone base when idle.
2.
Scroll or press REDIAL repeatedly
until the desired entry displays.
Dial a redial list entry
1.
Press REDIAL on the handset or
telephone base when idle.
Scroll or press REDIAL repeatedly
2.
until the desired entry displays.
3.
Press /HOME,
or
to dial.
-OR-
/HOME or
1.
Press
line.
-OR-
/CELL to use the cell line.
Press
Press REDIAL to enter the redial list.
2.
1.
Press
,
on the handset; or press CALLER ID /
or PHONEBOOK /
repeatedly to browse until the desired
entry displays.
Press SELECT to dial the displayed
2.
number.
Delete a redial list entry
Press REDIAL to enter the redial list.
1.
2.
Press
,
on the handset; or press CALLER ID /
or PHONEBOOK /
repeatedly to browse until the desired
entry displays.
•
When the handset displays the number
you want to delete, press DELETE.
38
/CELL 1,
/CELL 2,
to use the home
or REDIAL repeatedly
or REDIAL
or REDIAL repeatedly
or REDIAL